60W Hydrogen fuel cell, Fuel cell stack, Proton exchange membrane fuel cell

Short Description:

A single fuel cell consists of a membrane electrode assembly (MEA) and two flow-field plates delivering about 0.5 and 1V voltage (too low for most applications). Just like batteries, individual cells are stacked to achieve a higher voltage and power. This assembly of cells is called a fuel cell stack, or just a stack. The power output of a given fuel cell stack will depend on its size. Increasing the number of cells in a stack increases the voltage, while increasing the surface area of th...


Product Detail

FAQ

Product Tags

A single fuel cell consists of a membrane electrode assembly (MEA) and two flow-field plates delivering about 0.5 and 1V voltage (too low for most applications). Just like batteries, individual cells are stacked to achieve a higher voltage and power. This assembly of cells is called a fuel cell stack, or just a stack.

The power output of a given fuel cell stack will depend on its size. Increasing the number of cells in a stack increases the voltage, while increasing the surface area of the cells increases the current. A stack is finished with end plates and connections for ease of further use.
Inspecton Items & Parameter
                                                                                       Standard
Analysis

Output performance

Rated power
60W
79.2W
Rated voltage
12V
12V
Rated current
5A
6.6A
DC voltage range
8-17V
12V
Efficiency
≥50%
≥53%
Fuel
Hydrogen purity
≥99.99%(CO<1PPM)
99.99%
Hydrogen pressure
0.04~0.06Mpa
0.05Mpa
Hydrogen consumption
600mL/min
 
Environmental characteristics
Working temperature
-5~35℃
28℃
Working environment humidity
10%~95%(No mist)
60%
Storage ambient temperature
-10~50℃
 
Noise
≤60dB
 
More our products as below:

 


  • Previous:
  • Next:

  •