Design Standard AWWA C515
Threaded ends standard: ANSI B1.20.1
(Other Flange Types available upon request)
Triple O-Rings stem seal
Lifting lugs built into stuffing gland
Fusion Bonded Epoxy Coating to AWWA C550 Standard
Inspection & testing: AWWA C515
Working Pressure: 250PSL
Working Temperature: -20℃ To 100℃(-4°F to 212°F)
Operator: Handwheel,2″Operating Nut,Gearbox
| No | Part | Material(ASTM) |
| 1 | Body | Ductile lron ASTM A536 |
| 2 | Wedge | Ductile lron EPDM/NBR
Encapsulated |
| 3 | Wedge Nut | Brass ASTM B124 C37700 |
| 4 | Stem | Stainless Steel AISI 420 |
| 5 | Bonnet | Ductile lron ASTM A536 |
| 6 | Wedge Nut Gasket | Rubber NBR |
| 7 | Washers | Nylon/Brass ASTM B124
C37700 |
| 8 | O-ring | Rubber NBR |
| 9 | Gland | Ductile lron ASTM A536 |
| 10 | Handwheel | Ductile lron ASTM A536 |
| 11 | Bonnet Gasket | Rubber NBR |
| 12 | Bonnet/Gland Bolt | Grand 8 Steel With ZINC Plated |
| 13 | Dust Cap | Rubber NBR |
| 14 | Handwheel Bolts | Stainless Steel AISI304 |
Dimension
| inch | L | M(NPT) | H | Q | W | V |
| 1.5 | 6.5 | 1.5” | 9.05 | 0.94 | 6.3 | 1.57 |
| 2″ | 7.24 | 2” | 9.84 | 0.79 | 7.08 | 1.97 |
| 2.5″ | 7.48 | 2.5” | 10.39 | 1.14 | 7.08 | 2.56 |
| 3″ | 7.99 | 3” | 11.22 | 1.22 | 7.87 | 3.15 |
| 4″ | 9.01 | 4” | 14.17 | 1.30 | 9.84 | 3.94 |
| 6″ | 10.51 | 6” | 17.28 | 1.51 | 9.84 | 5.90 |
Production photoes
